Arizona's hottest summer on record has left a visible mark on residential pools across the Valley. Scottsdale-based Optimal Pool Care reports that repair and cleanup service calls have increased since August, with failed pumps, algae-filled pools, and scaled or cracked surfaces among the most common issues reported by homeowners.

The season's heat arrived unusually early and persisted well into fall. Phoenix recorded 100 degrees as early as March 18 - the earliest such reading in 20 years - and hit a daily record of 114 degrees on August 25. Statewide temperatures ran 2.7 degrees above the seasonal average throughout the summer.

What a Record Summer Does to a Pool

"Most homeowners think of a pool as something that sits there all summer. In reality, the pump, filter and water chemistry were working overtime for six straight months. By October, a lot of that equipment is worn out, and the damage usually doesn't show until something fails," said Santos Castro, owner of Optimal Pool Care.

Optimal Pool Care technicians report that this summer's damage falls into three primary categories:

• Overworked equipment. Pumps run longer hours to keep hot water circulating and clean. Motors overheat, bearings wear and seals fail, often all at once in early fall.
• Algae and unbalanced water. Sun and heat burn off chlorine faster than many homeowners can replenish it. A pool that goes without attention for a week or two can turn green within days.
• Surface and tile damage. Constant evaporation leaves calcium deposits behind from the Valley's hard water. That buildup creates scale on tile and plaster, while extreme temperature swings crack coping and loosen tile.

Five Signs Your Pool Took Heat Damage

Optimal Pool Care recommends homeowners check for these warning signs this fall:

1. The pump sounds different. Grinding, loud humming or a pump that trips the breaker typically indicates a worn motor or failing bearings.
2. The water won't stay clear. Cloudy or green water that returns days after treatment points to a filter or circulation problem.
3. A white crust at the waterline. Calcium scale on tile is easier and less costly to remove before it hardens further.
4. Rough, stained or flaking plaster. Surfaces that feel like sandpaper may require an acid wash or full resurfacing.
5. Cracked coping or loose tile. Small gaps allow water to work behind the tile and can develop into more extensive repairs over time.

Fall Is the Time to Fix It

Optimal Pool Care recommends homeowners have their pump, filter, water chemistry and surfaces inspected this fall, before minor heat-related damage develops into a larger repair project heading into next summer. The company provides weekly pool cleaning and full repair service across Scottsdale, Phoenix, Paradise Valley, Fountain Hills, Cave Creek, Tempe, Mesa, Gilbert and Chandler, with written pricing provided upfront before any work begins.

"Weekly service is the best protection against a summer like this one. When someone checks your chemistry, cleans your filter and listens to your pump every week, small problems get fixed before they turn into a $1,000-plus pump replacement," Castro said.

Homeowners can schedule pool cleaning or repair service by calling (480) 628-1992 or visiting optimalpoolcare.com.

About Optimal Pool Care

Optimal Pool Care is a Scottsdale-based pool service company providing weekly pool cleaning, pool repair, equipment service, resurfacing and leak detection across the Greater Phoenix area. With more than 15 years of experience serving Arizona homeowners, the company's technicians are Certified Pool & Spa Operators (CPO) and members of the Independent Pool & Spa Service Association (IPSSA). Optimal Pool Care serves Scottsdale, Phoenix, Paradise Valley, Fountain Hills, Cave Creek, Tempe, Mesa, Gilbert and Chandler from its office at 901 N. Hayden Road, Scottsdale, AZ 85257. Learn more at optimalpoolcare.com.

Contact Information:

Optimal Pool Care

901 N. Hayden Rd
Scottsdale, AZ 85257
United States

John Phillip
+1-480-628-1992
https://www.optimalpoolcare.com